Bobby Weindorf, as our curator and restorer, comes to us with a wealth of experience. Riding motorcycles since the age of 12, the passion was rooted at a young age. He has worked as technician for American Honda’s factory road race (Camel/Smokin’ Joes) and also Honda’s Supercross/Motocross team. He also spent time working with several other teams (Fast by Ferraci, Rumi Honda in Italy, Erion Racing) while at the same time running his motorcycle dealership in Santa Barbara. At his shop he produced many award winning restorations over the years. One of his biggest joys is bringing seemingly “dead” bikes back from their neglect either with full restorations or careful preservation. Now overseeing the collection here and at the same time on the lookout for new additions, Bobby is enjoying the dream of working on and talking about bikes that stir his passion.
An Interview with Bobby Weindorf
Imagine if your fulltime job was fettling more than 150 of the world’s most beautiful motorcycles. Welcome to the world of Bobby Weindorf, former factory race mechanic, motorcycle dealer, and ace restorer. Taking care of the prestigious Moto Talbott collection is his fulltime job. We asked him what it’s like.
Q: Do all these motorcycles run?
Weindorf: Yes. I can get anything in here running in 20 minutes or so. There is one bike from China that’s seized, and the Steve McQueen bike is missing a cable and throttle. But it’s my job to make sure all these bikes run!
Q: What are your primary responsibilities at Moto Talbott?
Weindorf: I keep all the bikes running and prep them for shows. And I need to make them correct. When Robb finds a new project, we need to make a decision: should I just make it run? Should I do a cosmetic restoration, or a full mechanical restoration? That depends on how far gone the bike is. And some bikes are left in their original state, to better convey their history and provenance.
We get some bikes that have hokey parts, or are missing things. So I do a lot of research, and get a lot of parts from Italy, Spain, and BMW. With BMW, I spend a lot of time contacting their archive to make sure things are correct.
Q: How did you meet Robb?
Weindorf: Robb came down to southern California to visit another collector I’ve worked for, Guy Webster. Robb said he had an old Husky he wanted restored, and I told him I’d do it. I came up to Carmel, restored that bike. Then he wanted a Vespa restored, and I did that. Then he said he wanted to start a museum, and did I want to move north? So I did.
Q: What are the most typical restoration tasks you perform?
Weindorf: I call it the “Ps”: Paint, polishing, powdercoating, and plating. We don’t have a paint booth, and there is no polisher nearby, so we have to send out for those things. And chromers are getting harder and harder to find. The best chromer in the country, in Kentucky, just closed. I try not to have very many parts powdercoated, but it can be the right choice for the frame and other parts that get banged around a lot.
So often it’s just the little things. Bikes are missing parts, or something small is incorrect. Sometimes I look at a bike with a strange modification or part and think, “What was someone thinking here?”
Q: Do you have to fabricate parts for very old or rare bikes?
Weindorf: Some things will require machining or fabrication, like bronze swingarm bushings. And some bikes have parts that are un-obtain-ium, and you have to figure out how to have them made. If it was a cast part, you’re stuck. Some companies were only in existence for a few years, like the Italian Devil. Where in the hell are you going to find parts for that?
But getting parts has actually gotten easier, thanks to the Internet. Instead of contacting one or two guys that you happen to know, you now have the whole world to look for parts.
Q: Are there problems that are specific to a country or brand?
Weindorf: Every manufacturer is different, and you can definitely see trends among the Germans, the Italians, and the British. But basically, they’re just two wheels and a motor.
Mechanically they’re not too difficult, unless someone blew up the engine. These bikes are pretty bulletproof. The most common thing to fail is wiring. But I love wiring and electrical problems. Old wires fray. Some bikes have specific known issues, like the “slinger” [sludge trap] on old BMWs. If it’s too full, the engine doesn’t get lubrication, and it blows up. So there are things like that, which you know you have to check.
Q: You’ve worked as a mechanic for factory race teams. How does this compare?
Weindorf: Old stuff is good to work on, because it’s so basic. You can get into every part of it—nothing is out of reach. With modern bikes, there are some things that you would never attempt to take apart. Just trying to set valves on modern bike is a headache. With these bikes, if you give me 20 minutes, I’ll have all the valves done. I love the simplicity of old bikes.
New bikes have amazing traction control, and wheelie control, and ABS—but these old bikes in many ways are more enjoyable and accessible. People are intimidated by vintage bikes, but they are really, really easy, once you have a have basic understanding of mechanics and motors. They’re all just variations on a theme. Does it have gas, compression, and a spark? Keeping them running involves checking valves and changing oil. Those are the cheapest insurance measures you can do.
Q: After all these years of wrenching, are you still learning new things?
Weindorf: All these bikes have their special significance and cool factor. We have a BMW R25 with a three-slide carburetor. I thought, “Wow! I’ve never seen that before!” So I took it apart to look at it. It’s wonderful and primitive at the same time.
Q: What do you ride personally?
Weindorf: People like to ask me that! It depends on what day it is. My favorite bikes are whatever is in my garage. There are 30 bikes in there. I just have to decide what I’m doing that day. Some Sundays I’ll ride three different bikes: one to the coffee shop in the morning, another for a lunch ride, and another for a little longer ride. Mostly I rotate between three: my Ducati Multistrada, Moto-Guzzi V7, and Honda GB500. I seem to be in a 500 phase. I also have a Triumph 500, a Yamaha RZ500, and a Fiat 500 car. I have a lot of 500 stuff in my life.
I’ve had bigger bikes—my Ducati is big, and I’ve had superbikes, Aprilias, and an MV F4. They’re plenty fast, but I’ll never be able to use all that horsepower on the street. I find the smaller, lighter bikes so much more fun. They give a better illusion of speed. The V7 in the real world is kind of slow and old feeling, but you get the feeling you’re going really fast when you’re doing 50mph! It’s all about how you feel. I could ride my MV and go 140mph—it’s so new and perfect, it doesn’t feel like anything. But you have to be going 140mph! Which is friggin’ crazy….